Ergonomic chair “Xilium” Duo Back- reflects the accuracy and quality of the manufacturer, as well as the perfection of the design. Designed by one of the world’s most famous designers , the German Martin Ballendat, the Xilium work chair is designed to solve all the problems of uncomfortable sitting. In cooperation with the best designer of office chairs and one of the largest suppliers of office furniture, a line of chairs was created that meets the highest requirements of an investor, architect and employee.

Ergonomic chair “Xilium” Duo Back, designed for dynamic sitting, which contributes to greater employee satisfaction and work efficiency. Did you know that even physical activity after work cannot help eliminate the negative effects of sitting if you do not move in the office? Xilium, with its innovative, ergonomic solutions, supports and activates movement and allows you to sit in your favorite positions.

The Xilium product line is very wide to adapt to the needs of each customer. Due to this, a diverse set of chairs is possible: the choice of different mechanisms, armrests, frame and base. For more information, please call +37065591122 or e-mail info@musonas.lt.

Seat and backrest

The frame of the backrest black or white plastic is sheathed with a high-quality tapestry;
A comfortable seat is upholstered in a high-quality tapestry, which is made of cast durable polyurethane.
Height-adjustable backrest.
The lower part of the backrest is made of polished aluminum. It is possible to order additionally- inquire.
Backrest movements “X-move” (XV) – allows the backrest to move sideways and perform a slight rotation. When ordering, it is possible to select this function additionally- inquire.

Headrest

The tapestry is covered with a soft headrest;
The ability to adjust the height of the headrest and the angle of rotation. When ordering, you can choose additionally – inquire.

Lumbar support

The backrest has an additional horizontal lumbar support that can be adjusted. When ordering, there is a choice – inquire.

Mechanisms

Thanks to the multifunctional synchronous mechanism, dynamic tilting of the backrest and seat is possible in a ratio of 2.5:1;
With the help of a high-end cylinder, the height of the chair is evenly adjusted;
Adjustable stiffness of the backrest guide;
Swing position;
Angle of inclination of the backrest 30 °,
Protection that prevents the backrest from hitting a person’s back when the knob is released (“anti-shock” function);
The ability to fix the seat and backrest in 5 positions;
Seat depth adjustment system. This is especially true for users with longer legs, as it helps to make the most of the possibilities of comfortable sitting.

Armrest

The armrests of the white frame are adjustable up, down;
The armrest pads are adjusted back and forth and to the sides;
The armrest cushions are made of soft durable polyurethane.
When ordering, you can also choose black frame armrests- inquire about this option.

When ordering, you can also choose 4D or X-D armrests- inquire:

4D armrests

The base of the 4D armrests is made of black or white fiberglass-reinforced polyamide (PA + GF) or polished aluminum with a chromium effect;
The upper structure of the armrests is made of black or white fiberglass reinforced polyamide (PA + GF), an armrest cushion made of black soft polyurethane (BPU).
Range of adjustment of the height of the armrests (up-down): 100 mm ( 11 positions);
The armrests widen to the sides by 70 mm;
The forward / backward movement of the armrest pads in the range of 40 mm, the ability to rotate the pads ± 360 °.

X-D armrests

The base of the X-D armrests is made of polished aluminum with a chromium effect;
The upper structure of the armrests is made of black or white fiberglass reinforced polyamide (PA + GF), an armrest cushion made of black soft polyurethane (BPU)
Range of adjustment of the height of the armrests (up-down): 100 mm ( 11 positions);
The armrests widen to the sides by 50 mm;
The forward / backward movement of the armrest pads in the range of 40 mm, the ability to rotate the pads ± 360 °.
Additionally, armrest pads can be pushed to the sides (to the inner or outer side of the chair).

Basis

White nylon base. When ordering, you can choose a black nylon, powder-painted black-metal or polished aluminum base- inquire.
Self-stopping wheels for carpeting or parquet.

The Xilium product line is very wide to adapt to the needs of each customer:

Ergonomic chairs with three types of backs to choose from: Duo-Back(double backrest), softly tapestry-upholstered backrest (“UPH”) and mesh-covered backrest;

Conference chairs with different bases: on a curved metal leg, on four stable legs (an option with and without wheels) and a swivel with wheels.

Flexibility, dynamism is one of the most important functions that an office should have. Thanks to the very wide selection of Xilium configurations and a wide range of finishes, you can be sure that you will maintain the consistency of the layout in any space.

THE CHOICE OF COLOR CONCEPT (SELECTION OF PLASTIC AND POLISHED ALUMINUM FITTINGS OF A DIFFERENT COLOR):

Selection of 3 different armrests:

3D armrests

3D armrests are attached to the frame of the chair. The design of the armrests is made of black or white polyamide (PA), the armrest cushions are made of black soft polyurethane (BPU).
Adjustment of the height of the armrests: up-down in the range of 100 mm. Possible additional adjustment of the height of the armrests, which occurs due to the backrest height adjustment;
The forward / backward movement of the armrest pads in the range of 40 mm, turning to the side ± 30 °.

4D armrests

The base of the 4D armrests is made of black or white fiberglass-reinforced polyamide (PA + GF) or polished aluminum with a chromium effect;
The upper structure of the armrests is made of black or white fiberglass reinforced polyamide (PA + GF), an armrest cushion made of black soft polyurethane (BPU). Range of adjustment of the height of the armrests (up-down): 100 mm ( 11 positions);
The armrests widen to the sides by 70 mm;
Movement of armrest pads forward / backward 40 mm, the possibility to rotate the pads ± 360°.

X-D armrests

The base of the X-D armrests is made of polished aluminum with a chromium effect;
The upper structure of the armrests is made of black or white fiberglass reinforced polyamide (PA + GF), an armrest cushion made of black soft polyurethane (BPU). Range of adjustment of the height of the armrests (up-down): 100 mm ( 11 positions);
The armrests widen to the sides by 50 mm;
The forward / backward movement of the armrest pads in the range of 40 mm, the ability to rotate the pads ± 360 °.
Additionally, armrest pads can be pushed to the sides (to the inner or outer side of the chair).

Different bases

A solid nylon base can be black or white.

It is possible to choose a base of polished aluminum or powdered black aluminum.

The creator of Xilium, Martin Ballendat, is one of the best designers specializing in office chairs and furniture. His studio has received more than 150 design awards, including 40 “Red Dot” Awards, and works internationally with many well-known brands in 15 countries. The chairs he designed are used by more than one million people, so he understands the needs of today’s offices and employees like no other.

The Xilium line of chairs began to be produced in accordance with the guidelines of the circular economy.

Caring for the environment is one of our top priorities, so by purchasing a chair, you can be sure that you are reducing emissions and waste.

Renewable

The Xilium line was implemented on the basis of a list of substances, which included requirements for suppliers in the field of consumer health and safety (environment, toxicity and emissions). This was the first time that we began to produce a chair, having analyzed the structure, origin and recyclability of all materials. Approximately 96% of the materials can be recycled after you stop using the chair.

Durable and of high quality

Xilium was created for long-term use. Due to the high quality, the chair has a five-year warranty.

Environmentally friendly

Easy configuration and replacement of components is an important component component of the circular economy. Many parts of the Xilium chair can be easily replaced, more than half of which can be replaced by the user with simple tools by following the instructions for replacing the components. In this way, you contribute to reducing the amount of waste and at the same time save money.

Changing seat or seat fabrics

Backrest replacement

Due to the unique design of the chair frame, you can replace the backrest with a different finish (for example, when the upholstery gets dirty) or choose a different type of backrest (“Mesh”, “Tapestry” or “Duo-Back”(“double backrest”).

We sit down. And we sit down. Many hours are spent at work. You can not avoid sitting, but you can do it without harm to your health. There is one solution for this: an office chair that does not restrict your movement!

X-move function

The human body is designed to constantly move in different directions. Only if the chair allows you to make such a movement, it can be said that it helps to take care of your spine and the musculoskeletal system. The solution is, it’s our patented X-MOVE mechanism. The X-MOVE allows you to dynamically move in the front plane or to the sides. In addition, it activates a small rotational movement in the lumbar region. It must be remembered that the healthiest sitting is dynamic sitting.

DUO-back- double backrest

The duo-back back consists of two symmetrical parts mounted on movable joints. The backrest does not directly press on the vertebrae and discs of the spine, thereby reducing the pressure on the back to 50%.

Lumbar support

Soft-upholstered (UPH) and mesh backrest models are designed in such a way that the lumbar support is adapted for use in two dimensions (forward and backward). For the mesh version, it is made of soft and flexible material that provides proper support for the most vulnerable area of the spine.

We provide a warranty for this chair. The warranty is effective from the date of purchase. A purchase document is required to prove the purchase.

The chair has been carefully manufactured and thoroughly tested before delivery to meet the standards and stringent quality and safety requirements.

*The 60-month warranty applies to the mechanism for lifting and rotating the chair. The rest of the chair – the structure and mechanisms, as well as manufacturing defects, is subject to a 2-year warranty.

The warranty does not apply if the product was assembled and used outside the instructions, improperly stored, damaged, broken, cleaned with the wrong means, unattended and dirty (ground and other dirt in the mechanisms), or otherwise used for the wrong purpose. The warranty does not apply to the natural deterioration of the product or to changes in its properties, any damage and scratches. The occurrence of any scratches, marks or other damage done by force and using the chair not according to its primal purpose is also considered as non-warranty case. The product is not covered by the warranty in the event of scratches, marks or damage caused by shocks and misuse. The warranty does not apply if the products are stored outdoors or in a humid environment, or used for non-domestic purposes.

The warranty is also void if the chair has been modified, repaired, or attempted to be repaired by non UAB Musonas.

Should be noted that:

The chair is designed for seating and for one person only;
The chair is designed for use in dry indoor areas only on level floors;
It is forbidden to stand or stumble on the chair;
After getting the chair dirty, clean it immediately;
If you feel any part of the limp during sitting, loosen the parts immediately. At least every 3 months check that all bolts are tight and the chair is stable;
Protect the chair from moisture and mechanical damage;
It is forbidden to use the chair if any part is broken or lost.

Want to see and try this chair? We invite you to visit one of our salons in Lithuania. First of all, we recommend that you contact the chosen salon beforehand and check whether it is possible to test your chosen chair at the desired time. Our consultants will be happy to help you choose the most suitable and comfortable chair.

Musonas showrooms are located in major cities of Lithuania:

Vilnius
Kaunas
Panevėžys

You can find contact details and addresses here

Xilium UPH R53-W/BPU TS30

24/7

Sėdynės gylio reguliavimo sistema

Lumbar support

Reguliuojamo aukščio atlošas

Reguliuojamas kreipimo standumas

Anti-shock

5 fiksavimo padėtys

Reguliuojamo aukščio porankiai